The following are the 2 x most common ways the Carbon Supra Exhaust Shield can be mounted, there are pros and cons to each.
 
Please Note: We always recommend professional body shop installation.
 
 

Double Sided Tape Install - Use 3M VHB Tape Black colour 

  1. Test fit the exhaust shield on the bumper first, note the position for best fitment.
  2. Clean both surfaces with prepsol.
  3. Apply the 3M tape to the back of the exhaust shield first, ensuring good coverage around the edges, press firmly for 30 seconds.
  4. For best results heat the tape now with a hairdryer or heat gun (don't overheat).
  5. Remove the backing strip and stick onto the correct place on the bumper, press and hold for 30 seconds all over.

 

 

Silicone - Use Black Sikaflex 227

  1. Test fit the exhaust shield on the bumper first, note the position for best fitment.
  2. Clean both surfaces with prepsol.
  3. Apply an even bead of black silicone around the edge of the exhaust shield.
  4. Carefully move into the correct position on the bumper, once in place use good masking tape to secure and leave overnight to set.
  5. Remove any excess silicone with prepsol before it dries.