This store requires javascript to be enabled for some features to work correctly.

Carbon Fibre Mirror Covers for JDM RHD Supra Mk4 JZA80

  • $ 249.00 AUD

Real 3K Twill Weave Carbon Fibre moulded mirror covers specifically designed for RHD JDM Mk4 Supra's

 

Features:

  • Real molded 100% carbon fibre mirror covers, that cover pretty much the entire mirror and look nothing short of stunning once installed.
  • Excellent fitment and carbon work guaranteed! Each set is test fitted and quality controlled to the highest standard.
  • Easy fitment with pre-applied double sided tape.
  • Fits JZA80 RHD JDM Supra only (will not fit USDM).

 


What you get:

  • Pair (2) left and right side carbon fibre mirror covers to suit RHD JDM 1993-2001 Supra Mk4 JZA80
  • Pro Spec Imports Sticker and keychain.

 

For Shipping costs and ETA's CLICK HERE

 

Installation tips:  

Please note: we recommend professional installation.

  1. Thoroughly clean the mirror with a wax and grease remover.
  2. Be careful because you don’t want to scratch anything on installation.
  3. Before removing the tape-backing perform a test fit. Carefully prise open the carbon mirror cover so it will slip over the mirror stalk, pushing it firmly onto the mirror you can see where it will sit when fully in position.
  4. Now for the final install. Remove the tape backing and get the cover into position, be sure not to let the tape touch the mirror until it is in the correct position and on fully. Line up the carbon edge around the mirror opening, ensuring it is sitting straight and right out to the edge. 
  5. If it’s cold then (carefully) heating the tape with a hairdryer or heatgun before installation will help it to adhere better. 
  6. Once fitted hold in place firmly for 30 sec, pressing and holding around all the different sides and the mirror opening edge so the tape sets everywhere. 
  7. If you have a problem with a certain area not sticking then you probably didn’t clean it well enough with the wax and grease remover. Try cleaning it again and apply more 3M tape.
  8. Removal: If you ever need to remove them - carefully heating with a heatgun will help soften the tape.

     

    Tips for caring for carbon: All of our carbon is cleared with a UV protectant clear coat. To keep your carbon looking beautiful long term it helps to wax with a UV protectant wax like Autoglym HD Wax (its also what McLaren recommend for protecting the carbon on their supercars), this will give it extra protection from the sun and help to keep it looking good for years to come.